Car Care
Tyres: pressure, wear and a simple inspection routine
Use the correct pressure and spot damage before a journey.
Tyres provide the contact between the car and the road. Their condition affects steering, braking and the ability to cope with rain. A quick check before driving can reveal an obvious problem, but it does not replace scheduled maintenance or a professional inspection when damage is suspected.
Find the correct pressure
Use the pressure specified for the vehicle and load in its handbook or tyre-pressure label. The number moulded on a tyre's sidewall is not normally the everyday setting to use. Front and rear recommendations may differ, and a full load may require different settings. Ask your instructor to show you where the correct information is located.
Check pressures using a suitable gauge at the condition specified by the manufacturer, commonly before significant driving when tyres are cold. Do not release air from a hot tyre simply to match a cold-pressure recommendation. If you are unsure about the reading or equipment, ask a tyre professional to demonstrate.
Look for visible problems
Inspect for cuts, bulges, embedded objects and uneven wear. Check that there is no obvious loss of pressure and that valve caps are present. Look across the tread where it is safe to do so. A bulge or serious damage needs professional assessment; do not assume a tyre is safe because it still holds air.
Wear indicators help show when a tyre is approaching a replacement threshold, but legal minimums are not a guarantee of good wet-weather performance. Follow applicable rules and the tyre and vehicle manufacturers' advice. Replace unsuitable or damaged tyres with the correct specification and seek help when wear is uneven.
Understand warning systems
A tyre-pressure monitoring system may alert you to a problem, but it does not remove the need for checks. Systems differ and can need a correct reset after pressure adjustment or tyre work. Read the handbook. If a warning appears during a journey, slow carefully, stop safely and inspect or seek assistance.
Prepare for a puncture
Know whether the car has a spare wheel, repair kit or roadside-assistance provision. Temporary spares and sealants have limitations. Do not attempt a wheel change where traffic or ground conditions make it unsafe. Never work underneath a vehicle supported only by its jack. A sensible driver understands the available equipment and also knows when professional recovery is the safer choice.
Sources and review date
Reviewed 12 November 2026. Official requirements can change; check the linked authority before applying or travelling.
